• Adresse

    2101 rue Nobel - Local J
    Sainte Julie, Quebec, J3E 1Z8

  • Téléphone

    +1 514 416 5100

  • Cont@ct

    contact@picard-technologies.ca

  • Un devis ?

PTFE FAMILY PRODUCE BY PICARD Technologies®

 
Production programme PTFE & Sideflon® families, deliver in billets or tubes, please contact us at +1 514 416 5100
 
Materials Colors Density
g/cm3
  Tensile Strengh
ASTM D4894
Mpa
Elongation at break
ASTM D4894
%
Hardness
ASTM D2240
Shore D / Rockwell
 
  Typical applications & recommendations
   
Virgin PTFE Fine powder White 2,17   37 350 54 / 29 Typical properties of PTFE with better characteristics than standard virgin PTFE
 
  Standard  White 2,16   35 240 54 / 29 Typical properties of PTFE, see PTFE page on the site
 
Modified PTFE TFM® 1705 White 2,17   34 450 52 / 27 Typical properties of PTFE, more flexible and more remanent, less porous, recommended for the production of bellows and membrans  
 
Sideflon®
N050 cream N/A   30 310 58 / 31 High Quality grade specifically designed for food applications, low coefficient of friction, high resistance to abrasion, FDA, CFR21 & 3A -20-27 certification No. 3679
Special compounds
PICARD Technologies® green/petrol N/A   32 280 58 / 31 Especially design for food applications, low coefficient of friction, high resistance at abrasion, FDA, CFR21 
 
  N044 black N/A   15 80 63 / 37 Carbon grade with low coefficient of friction, for busching, guiding, composit seal with soft counter face, FDA, CFR21 & 3A -20-27 certification n°3679
 
  N090 dark green N/A   20 210 58 / 31 Excellent abrasion resistance, recommended for scraping in food applications, FDA, CFR21
 
PTFE 25% hard carbon black 2,10   20 80 67 / 41 Excellent resistance to friction and high radial loads, BE CAREFUL to use if system lubrication (hydraulic cylinder, lubricated guide, etc.)
 
PTFE 10% Polyimide clear brown 2,03   26 290 60 / 35 Low coefficient of friction, good chemical resistance, DO NOT use with water or steam
 
PTFE 10% Ekonol® cream 2,05   24 280 58 / 31 Good combination for the realization of friction parts and guiding, this compound is used for the food application, FDA, CFR21
 
PTFE 50% Stainless steel grey 3,35   22 230 67 / 41 Good resistance to compression and high loads, to water and steam generally used for the realization of gaskets, FDA, CFR21
 
PTFE 15% Glass fiber + 5% Mos2 grey 2,27   25 280 63 / 37 Good combination for the production of guiding, scrapers, seals in the hydraulic and pneumatic fields
 
PTFE 5% Glass fiber off white 2,18   30 300 60 / 35 Typical properties of PTFE with improved creep and friction resistance FDA, CFR21
 
PTFE 15% Glass fiber   off white 2,23   24 270 58 / 31 Typical properties of PTFE with good creep, abrasion and friction resistance FDA, CFR21
   
PTFE 25% Glass fiber   off white 2,25   20 240 60 / 35 Typical properties of PTFE with very good creep, abrasion and friction resistance FDA, CFR21
 
PTFE 40% bronze   brown 3,10   29 230 63 / 37 Typical material for the realization of composit seals in the hydraulic field, good resistance to friction, creep
 
PTFE 40% + 3% Mos2   dark brown 3,16   25 220 63 / 37 Typical material for the realization of composit seals in the hydraulic field, good resistance to friction, creep, works without lubrication
 
Other materials on demand *Sideflon is a trademark of PICARD Technologies® - Ekonol® is a trademark of Saint Gobain® - TFM® is a trademark of Dyneon®

Style Selector

Layout Style

Predefined Colors

Background Image